270° Awning Wall Kit
270° Awning Wall Kit
Designed, Sourced, and Built in the USA
Estimated Lead Time: 1-3 Weeks
Ambidextrous design for use on both Driver and Passenger side awnings
90” Wall Ideal Mounting Height: 74-84” ground to awning
120” Wall ideal mounting height: 97-107” ground to awning
Guy-lines, ground stakes, and storage bags included
Five (5) Year Warranty
Designed for use with Kinsmen Hardware 270 Awning only
Scroll down for detailed information
Features
• Designed, Sourced, and Built in the U.S.A.
• Cordura® 500D solution dyed, mil-spec, and water resistant coated fabric cut and sewn in-house
• Attaches to awning using mil-spec hard-action snaps and Velcro.
• Each panel has a #8 or #10 YKK Vislon detachable, double pull, locking zipper to connect panels together at corners
• Ground stake webbing loops along bottom edge
• Guy line attachment webbing loops 2ft up from bottom
• Each panel bottom 2ft can be rolled up and secured with webbing loop for additional air flow
• 10 inch Steel Zinc Coated ground stakes included, made in Tennessee
• 550 Paracord guy lines included with poly line tensioner
• Cordura storage pouch included to hold ground stakes and guy lines
• 18oz VCP storage bag included for individual wall panels and complete wall kit
Wall 1 (Small) and Wall 2 (Side)
Wall 3 (Rear) and Wall 1 (Small)
Wall 1 (Small) in front position
Wall 2 (Side)
Wall 3 (Rear)
Wall 1 (Small) in rear side position
Wall 4 (Pizza) is used to fill the gap between Wall 1 and the vehicle. Wall 4 is shown not rolled up in image above. Wall 1 is rolled up.
Wall 3 (Rear) interior view
Wall 3 (Rear) Bottom rolled up and secured using interior webbing with snaps secured to the under side of the exterior guy line loops
YKK zippers with locking double pulls attach each panel at every corner. These can also be used as doors.
Interior view rear
Wall 2 (Side) and Wall 3 (Rear)
Wall 1 (Small) and Wall 4 (Pizza)
Wall 1 (Small) in front position bottom rolled up with guy-lines secured
Wall 2 (Side) bottom rolled up with guy-lines secured
Wall 3 (Rear) bottom rolled up with guy-lines secured
Wall 1 (Small) in rear side position with bottom rolled up and guy-lines secured
Wall 3 (Rear) - All panels are angled away for better wind and rain performance and increase interior square footage
Wall 3 (Rear) interior view with bottom rolled up and secured
Close up of bottom rolled up and secured using interior webbing with snaps secured to the under side of the exterior guy line loops
YKK #10 Vislon Separating zippers with locking double pulls attach each panel at every corner.
Interior view front
